Kit includes 1524 Dual Channel Handheld Thermometer Readout, 5615-12-P Secondary Standard PRT Probe, Universal TC INFO-CON Connector, TPAK ToolPak Magnetic Hanging Kit, and Carrying Case
Dual Channel Handheld Thermometer Readout (1524)
Input channels: 2
Resolution PRTs and thermistors: 0.001°; thermocouples: 0.01°
Logging: 25 readings with statistics/15,000 time and date stamped
Sample interval (normal): 1 second (simultaneous measurement)
Secondary Standard PRT Probe (5615-12-P)
Termination: INFO-CON for Models 1523 and 1524
Temperature range: -200 °C to 420 °C
Nominal resistance at 0 °C: 100 Ohm ± 0.10 Ohm
Temperature coefficient 0.0039250 Ohm/Ohm/°C
Accuracy (includes calibration and 100 hr drift (k=2)): ±0.024 °C at -200 °C; ±0.012 °C at 0 °C; ±0.035 °C at 420 °CC
Short-term repeatability (three thermal cycles from min to max temp, includes hysteresis, 95 % confidence (k=2)): ±0.009 °C at 0.010 °C
Drift (After 100 hrs at max temp, 95 % confidence (k=2)): ±0.007 °C at 0.010 °C
Sensor length: 28 mm (1.1 in.)
Sensor location: 6.9 mm ± 3.3 mm from tip (0.27 in. ± 0.13 in.)
Sheath dimensions: 305 mm x 6.35 mm (12.0 in. x 0.250 in.)
Sheath diameter tolerance: ±0.127 mm (±0.005 in.)
Sheath material: Inconel 600
Minimum insulation resistance: 1000 MOhm at 23 °C
Transition junction temperature range (temperatures outside this range will cause irreparable damage; for best performance, transition junction should not be too hot to touch): -50 °C to 200 °C
Transition junction dimensions: 71 mm x 13 mm dia (2.8 in. x 0.5 in.)
Maximum immersion length: 254 mm (10 in.)
Response time (Per ASTM E 644): 9 seconds typical
Self heating (in 0 °C bath): 50 mW/°C
Lead-wire cable type: PTFE insulated with PTFE jacket, 22 AWG
